[j-nsp] E120 Configure single domain to authenticate from adifferent RADIUS

Masood Shah masoodshah at juniper.net
Wed Aug 12 07:23:40 EDT 2009


You can use one RADIUS server (cluster as well) for all the domains and decide on the RADIUS instead of RAS/BRAS. You can use your primary RADIUS as n proxy for particular domain,user,subnet  to redirect/out-source the auth,authrozn,acc of dial-in user,realm etc to another RADIUS server, which is more scalable and reliable than having a separate server for a specific domain. And this way server farm can act as both a primary and backup at the same time.
 
Regards,
Masood
 
 
________________________________

From: juniper-nsp-bounces at puck.nether.net on behalf of Jason Alex
Sent: Wed 8/12/2009 9:13 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] E120 Configure single domain to authenticate from adifferent RADIUS



Dear All,
           How can i configure on the E120 Router to make some users with a
specific doman (i.e xxxx.com) to authenticate from a different RADIUS
Servers using pppoe other than the RADIUS Server used by all the other users

Appreciate your help

Thanks
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp




More information about the juniper-nsp mailing list