[j-nsp] op script for checking when rpd fails

[Truman Boyes]

If RPD crashes or cores you will get syslog messages, which an event  
script can match on, then I suppose you could issue 'restart routing'.

Truman


On 21/08/2009, at 1:33 AM, Noah Garrett Wallach wrote:

> sthaug at nethelp.no wrote:
>>> I'd like to have an op script turn off some interfaces when rpd  
>>> fails. Does anybody know how to notify an op script to do  
>>> something based on a process failing and/or disappearing?
>> Not really answering your question, but: If you have serious problems
>> with rpd dying *often*, you really need to open a JTAC case. rpd is
>> such an important part of the system that the router really can't do
>> much without it...
>
>
>
> no doubt - we took care of that within 5 minutes of the core found.   
> we are fairly diligent with that type of stuff.  that still does not  
> address our op script next steps.
>
>
>> Steinar Haug, Nethelp consulting, sthaug at nethelp.no
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>