[j-nsp] Loop Interface between logical-systems

Stefan Fouant sfouant at shortestpathfirst.net
Wed Dec 2 19:20:24 EST 2009


For routing between VRs there is no need to use any type of tunnels or interfaces as you can simply leak routes using rib-groups or use static routes with a 'next-table' keyword to direct traffic into another VR.  Having said that, there may be instances where you do want to connect VRs via a physical interface, such as the case where you are doing "Firewall-on-a-stick" models coupled with Filter-Based Forwarding (FBF).

Sorry for the top post.  I'm on BB.

Stefan Fouant
www.shortestpathfirst.net
------Original Message------
From: Rich Schultz
To: sfouant at shortestpathfirst.net
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] Loop Interface between logical-systems
Sent: Dec 2, 2009 6:53 PM

> Use logical-tunnels (lt-x/x/x) to connect logical systems.

How about virtual-router routing-instances?  Can you connect two of those on
the same router without tying up physical interfaces?

Rich Schultz


Sent from my Verizon Wireless BlackBerry


More information about the juniper-nsp mailing list