[j-nsp] PFE-forwarded IPv6

[Truman Boyes]

Can you post the relevant configuration from the box? I expect that the host is directly connect to the MX-960; and the interface that is facing the host is running RA; furthermore if you look at the routing table on the host, you will see a default route to the MX's link-local address?

Now is the 6in4 tunnel configured on the MX or is this further upstream? Does the other end of the 6in4 tunnel know how to reach your prefixes?

Kind regards,
Truman



On 21/12/2009, at 9:57 AM, Jonathan Lassoff wrote:

> I'm having an odd problem routing IPv6 traffic through an MX-960 I'm
> testing. I'm sending traffic from a directly connected host through the
> Juniper box to be routed out to the Internet. I can ping the address on
> the MX from the downstream router, but can't seem to route *through* the
> Juniper.
> 
> One thing that may be pertinent is that the next-hop I expect the
> traffic should take is on the other end of a 6in4 tunnel.
> 
> Any ideas?
> 
> Cheers,
> jonathan
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>