[j-nsp] Shaping on regular PIC

Peter Van Oene petvan at gmail.com
Sun Dec 27 08:48:44 EST 2009


On Wed, Dec 23, 2009 at 4:34 AM, Ramesh Karki <rameshkarki at gmail.com> wrote:
> Dear Truman
>
> Thanks for clearity. We are using policers with limited brust size. I was
> just wondering whether shaping can be done using DiffServ or not. I have
> tried using classifer or scheduling but didn't get succcess.


Hi Ramesh,

If you get your traffic into queues via a classifier or some other
means, you should be able to use the "exact" keyword on that PIC on
each of the schedulers attached to the queues. This will get you
shaping per queue with the caveat being you only have 4 queues for the
physical port.

If you have a config to share with a "show interface extensive" for
the egress interface, I'm sure we can see if there are any issues.

Pete






> Thank You
>
> Regards,
> Ramesh
>
> On Tue, Dec 22, 2009 at 6:08 PM, Truman Boyes <truman at suspicious.org> wrote:
>
>> On a regular PIC (ie. non IQ/IQ2/etc...) you do not have individual queues
>> per IFL. Therefore you can only queue on a single aggregate (ie. IFD).
>>
>> You may want to explore using policers on outbound based on DSCP/ToS
>> markings. I know it's not exactly what you are looking for, but you should
>> be able to make some TCP-friendly policers that have some defined burst
>> sizes. As this would be policing there would not be queueing involved so a
>> delay buffer would not be possible. This is the best you will get with a 4FE
>> card.
>>
>> Kind regards,
>> Truman
>>
>>
>> On 17/12/2009, at 7:28 PM, Ramesh Karki wrote:
>>
>> > Hi Alex,
>> >
>> > Thanks for your response. There is no option like GTS (Cisco feature) for
>> > traffic shaping on juniper regular PIC. Current i have 4FE regular PIC,
>> need
>> > to shaped the traffic and i am looking for configuring exact scheduling
>> > matching all traffic with best effort for 64K and delay buffer upto 128K.
>> >
>> > Thank You
>> >
>> > Regards,
>> > Ramesh
>> >
>> > On Tue, Dec 15, 2009 at 5:21 PM, Ramesh Karki <rameshkarki at gmail.com>
>> wrote:
>> >
>> >> Hi experts,
>> >>
>> >> I m trying to shape traffic on Regular 4FE-PIC  with JunOS 9.2. I think
>> >> shaping on regular PIC can only be done using DiffServe queue.
>> >>
>> >> if someone have already done or configured, configuration will be really
>> >> appreciated.
>> >>
>> >> Thank you,
>> >>
>> >> Ramesh
>> >>
>> >>
>> >>
>> > _______________________________________________
>> > juniper-nsp mailing list juniper-nsp at puck.nether.net
>> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>> >
>>
>>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


More information about the juniper-nsp mailing list