[j-nsp] transfer between 2 ns2000's is slow
Leslie
leslie at craigslist.org
Tue Feb 10 15:44:11 EST 2009
I got some good advice that my limits are suspiciously close to some tcp
limits -- I have tried some tuning in my kernel but I am going to try
hacking around a bit more and see if it helps with anything as well.
Leslie wrote:
> I'm having a strange problem that I haven't been able to fix after much
> studying --
>
> Basically my setup is host 1 - fw1 - dedicated 1gige link (~25ms lag) -
> router2 - fw2 - host 2
>
> I can blast udp across this pipe without a problem, but tcp traffic
> seems to be limited to about 3 mbyte/s -- I can make multiple sessions
> that are all transferring at this speed, but no individual session will
> go over that "limit"
>
> Another thing that makes me extremely suspicious is occasionally when I
> start a transfer I'll see a brief cpu spike -- like shown below
>
> get perf cpu detail
> Average System Utilization: 21%
> Last 60 seconds:
> 59: 37 58: 34 57: 38 56: 27 55: 39 54: 38
> 53: 81** 52: 76** 51: 81** 50: 77** 49: 82** 48: 62*
> 47: 36 46: 37 45: 35 44: 36 43: 36 42: 35
> 41: 32 40: 37 39: 33 38: 37 37: 34 36: 39
> 35: 33 34: 38 33: 33 32: 39 31: 33 30: 39
> 29: 31 28: 40 27: 29 26: 42 25: 35 24: 41
> 23: 35 22: 38 21: 31 20: 35 19: 32 18: 41
> 17: 35 16: 38 15: 34 14: 39 13: 35 12: 40
> 11: 33 10: 40 9: 32 8: 39 7: 45 6: 39
> 5: 34 4: 40 3: 35 2: 42 1: 36 0: 39
>
>
> I've obviously spent hours and hours on the phone/email with tac without
> much help. Does anyone have any ideas of what could be doing this? Any
> troubleshooting tips?
>
> Thank you
>
> Leslie
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list