[j-nsp] group re0 routing-options

Erdem Sener erdems at gmail.com
Mon Feb 16 10:10:40 EST 2009


Hello,

 Although you can't put fxp in a different routing instance, you could
put it in a logical router.Of course, you'll need to copy any static
routing or relevant
stuff to that logical router too.

HTH,
Erdem

On Mon, Feb 16, 2009 at 3:27 PM, Eric Van Tol <eric at atlantech.net> wrote:
>> So probably its is better to set up a virtual router instance and move
>> the fxp0 interface into it and use that for management and get the
>> rib/fib separated from the global instance?
>>
>
> Unfortunately, you can't do this.  :-(  You can't even put it into a separate routing instance.  I imagine that this is because the management interface is supposed to be operational even if rpd or other daemons are borked.
>
> -evt
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


More information about the juniper-nsp mailing list