[j-nsp] Output rate on E1 link
Faizal Rachman
faizalr81 at gmail.com
Sat Feb 21 10:18:44 EST 2009
Actually it is on bundled E1 as shown below :
amnesiac at RA> show interfaces ls-1/2/0.3
Logical interface ls-1/2/0.3 (Index 88) (SNMP ifIndex 196)
Description: BB_Agg_8x_E1_to_RB-1_lsq-3/3/0.11
Flags: Point-To-Point SNMP-Traps 0x4000 Encapsulation: Multilink-PPP
Last flapped: 2009-02-20 06:52:22 WIT (03:42:35 ago)
Bandwidth: 16384kbps
Bundle links information:
Active bundle links 8
Removed bundle links 0
Disabled bundle links 0
Statistics Frames fps Bytes bps
Bundle:
Multilink:
Input : 736131100 21096 64681718106 14682112
Output: 888105552 30039 82320671247 22017840
Network:
Input : 736092880 21014 62131440103 14111328
Output: 888178093 29965 72967169475 19091368
Look that this link is consist of 8x E1 bundled but output rate was reach
more than 2x8Mbps.
Any explanation really appreciate :)
BR,
Faizal
On Sat, Feb 21, 2009 at 10:09 PM, Stefan Fouant <sfouant at gmail.com> wrote:
> Can you copy your output from 'show interface e1-x/x/x'?
>
>
>
> On 2/21/09, Faizal Rachman <faizalr81 at gmail.com> wrote:
> > Dear All,
> > I just want to make sure about output shown in show interface command, is
> it
> > possible that output rate counter surpass maximum limit of its interface
> > limitation?
> > Example: output rate in 1xE1 link shown almost 3Mbps rate.
> > Need advice :)
> >
> > Thank you.
> >
> > Faizal
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
>
> --
> Sent from Gmail for mobile | mobile.google.com
>
> Stefan Fouant
>
> Windows XP crashed.
> I am the Blue Screen of Death.
> No one hears your screams.
>
More information about the juniper-nsp
mailing list