[j-nsp] snmp oid for polling DCU

shariq qamar shariq.qam at gmail.com
Wed Feb 25 03:30:00 EST 2009


Hi techies,
 lot of mail has been exchanged regarding DCU/SCU configs ,
 i m able to get the desired valued both for destination class as well as
source class .
 when i initiate the command walk with below OID on MRTG server as well as
router
we are getting the same output corresponding to OID .

but we are not able to plot the data on MRTG server by calling the values
available in below output , can some has done the same on MRTG server .

is it required to load mib-jnx-dcu on MRTG server to plot the data or some
other is required .

outputs from router

shaiq at MUM-ISP> show snmp mib walk .1.3.6.1.4.1.2636.3.16
jnxScuStatsPackets.159.1.12.115.99.117.95.99.117.115.116.111.109.101.114 =
903057298
jnxScuStatsPackets.159.1.20.100.101.102.97.117.108.116.95.115.99.117.95.99.117.115.116.111.109.101.114
= 139440829
jnxScuStatsPackets.201.1.12.115.99.117.95.99.117.115.116.111.109.101.114 =
2736592
jnxScuStatsPackets.201.1.20.100.101.102.97.117.108.116.95.115.99.117.95.99.117.115.116.111.109.101.114
= 929812042
jnxScuStatsPackets.668.1.12.115.99.117.95.99.117.115.116.111.109.101.114 =
113309211
jnxScuStatsPackets.668.1.20.100.101.102.97.117.108.116.95.115.99.117.95.99.117.115.116.111.109.101.114
= 31745205
jnxScuStatsPackets.691.1.12.115.99.117.95.99.117.115.116.111.109.101.114 =
2882548
jnxScuStatsPackets.691.1.20.100.101.102.97.117.108.116.95.115.99.117.95.99.117.115.116.111.109.101.114
= 913450852
jnxScuStatsPackets.691.1.20.100.101.102.97.117.108.116.95.115.99.117.95.99.117.115.116.111.109.101.114
unable to create internal request

shaiq at MUM-ISP> show snmp mib walk .1.3.6.1.4.1.2636.3.6
jnxDCUSrcIfIndex.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0
= 159
jnxDCUSrcIfIndex.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
= 159
jnxDCUSrcIfIndex.668.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0
= 668
jnxDCUSrcIfIndex.668.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
= 668
jnxDCUSrcIfIndex.716.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0
= 716
jnxDCUSrcIfIndex.716.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
= 716
jnxDCUDstClassName.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0
= default_class
jnxDCUDstClassName.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
= dest_class
jnxDCUDstClassName.668.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0
= default_class
jnxDCUDstClassName.668.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
= dest_class
jnxDCUDstClassName.716.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0
= default_class
jnxDCUDstClassName.716.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
= dest_class
jnxDCUDstClassName.716.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
unable to create internal request



---------- Forwarded message ----------
From: shariq qamar <shariq.qam at gmail.com>
Date: Feb 23, 2009 11:38 AM
Subject: Re: [j-nsp] snmp oid for polling DCU
To: Ebben Aries <ebben.aries at gmail.com>, masood at nexlinx.net.pk


Dear Ebben ,

please help me out , we implement DCU and also get the data accordingly to
get the values but my SNMP server team is not able to uunderstand what value
they suppose to grap to plot the data .

blew are few outputs which i get from the walk of OID .




{master}
17347sha at MUM-ISP-AGGR-RTR- show snmp mib walk .1.3.6.1.4.1.2636.3.6
jnxDCUSrcIfIndex.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0
= 159
jnxDCUSrcIfIndex.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
= 159
jnxDCUDstClassName.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0
= default_class
jnxDCUDstClassName.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
= dest_class
jnxDCUPackets.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0
= 615392244
jnxDCUPackets.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
= 21986324
jnxDCUBytes.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0
= 166312660826
jnxDCUBytes.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
= 8027259994
jnxDcuStatsPackets.159.1.10.100.101.115.116.95.99.108.97.115.115 = 21986324
jnxDcuStatsPackets.159.1.13.100.101.102.97.117.108.116.95.99.108.97.115.115
= 615392572
jnxDcuStatsBytes.159.1.10.100.101.115.116.95.99.108.97.115.115 = 8027259994
jnxDcuStatsBytes.159.1.13.100.101.102.97.117.108.116.95.99.108.97.115.115 =
166312728017
jnxDcuStatsClName.159.1.10.100.101.115.116.95.99.108.97.115.115 = dest_class
jnxDcuStatsClName.159.1.13.100.101.102.97.117.108.116.95.99.108.97.115.115 =
default_class

{master}
17347sha at MUM-ISP-AGGR-RTR- show snmp mib walk .1.3.6.1.4.1.2636.3.6
jnxDCUSrcIfIndex.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0
= 159
jnxDCUSrcIfIndex.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
= 159
jnxDCUDstClassName.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0
= default_class
jnxDCUDstClassName.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
= dest_class
jnxDCUPackets.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0
= 615396852
jnxDCUPackets.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
= 21986325
jnxDCUPackets.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
unable to create internal request

{master}
17347sha at MUM-ISP-AGGR-RTR- show snmp mib walk .1.3.6.1.4.1.2636.3.6
jnxDCUSrcIfIndex.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0
= 159
jnxDCUSrcIfIndex.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
= 159
jnxDCUDstClassName.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0
= default_class
jnxDCUDstClassName.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0
unable to create internal request

{master}
17347sha at MUM-ISP-AGGR-RTR- show snmp mib walk .1.3.6.1.4.1.2636.3.6
jnxDCUSrcIfIndex.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0
= 159
jnxDCUSrcIfIndex.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
= 159
jnxDCUDstClassName.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0
= default_class
jnxDCUDstClassName.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
= dest_class
jnxDCUPackets.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0
= 615412410
jnxDCUPackets.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
= 21986335
jnxDCUBytes.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0
= 166317433041
jnxDCUBytes.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
= 8027264599
jnxDCUBytes.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
unable to create internal request

{master}
17347sha at MUM-ISP-AGGR-RTR- show snmp mib walk .1.3.6.1.4.1.2636.3.6
jnxDCUSrcIfIndex.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0
= 159
jnxDCUSrcIfIndex.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
= 159
jnxDCUDstClassName.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0
= default_class
jnxDCUDstClassName.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0
unable to create internal request

{master}



 On 2/17/09, Ebben Aries <ebben.aries at gmail.com> wrote:
>
> You will most likely find what you are looking for in
> JUNIPER-DCU-MIB:: (.1.3.6.1.4.1.2636.3.6)
>
> On Mon, Feb 16, 2009 at 5:46 AM, shariq qamar <shariq.qam at gmail.com>
> wrote:
> > Dear Techies ,
> >
> > I m done with QPPB configuration on my Juniper M320 box junos 8.5R3.4
> > and successfully able to get counters for the destination calss
> > i want  to see the plot of counters via SNMP server .
> >
> > will anybody explain me how to get OID's values in juniper .
> > what is the way to get OID's value for DCU so that same we poll via SNMP
> > server
> >
> >
> > --
> > Regards,
> > Shariq Qamar,
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
>



-- 
Regards,
Shariq Qamar,


-- 
Regards,
Shariq Qamar,


More information about the juniper-nsp mailing list