[j-nsp] route into inactive state

[fighter worker]

but if i filter it out it wont be in routing table also so i wont be
able to send it to other bgp peers using advertise-inactive

On Wed, Feb 25, 2009 at 1:36 PM, Berislav Todorovic <beri at mcvax.org> wrote:
> Yes, to filter it out. It will become hidden and inactive.
>
> Regards,
> Beri
>
> On Wed, 25 Feb 2009, fighter worker wrote:
>
>>> Dear all
>>> is there a way to force certain route recieved from BGP to be into
>>> inactive state even there is no other alternative route,through cisco
>>> i used to put that route with admin distance 255 but with juniper
>>> setting prefrence with 255 has no effect on that route cause there is
>>> no alternative route
>>>
>>> Best Regards
>>> _______________________________________________
>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>>
>