[j-nsp] M320 SW upgrade from Junos 8.4 to 9.2
cj11st at gmail.com
Sun Jan 4 04:18:23 EST 2009
We know that there is a big change from 8.4-8.5, that is why we decided to
wait a for a while.
Now we are planning to go with 9.2. We have enough free space to do an
upgrade. The question is how should we do an upgrade or what are your
experiences? Should we go directly to 9.2 ar we should do a step-by-step
On Sun, Jan 4, 2009 at 9:48 AM, Hangu Jeong <netcops at gmail.com> wrote:
> Refer to following instructions to upgrade to 9.2,
> In JUNOS Release 8.5, the JUNOS software was extended to use FreeBSD
> version 6.1. As a result, the following requirements apply when you upgrade
> your routing platform to JUNOS Release 8.5 and later:
> For J-series, M-series, MX-series, and T-series routing platforms, the
> minimum requirement for installation media (such as a compact flash disk,
> internal flash disk, or PC Card) is 256 MB.
> For M-series, MX-series, and T-series routing platforms, you must perform
> the upgrade using the jinstall package.
> On Sat, Jan 3, 2009 at 1:52 AM, robi robi <cj11st at gmail.com> wrote:
> > Hi all,
> > plan is to upgrade our redundant-M320 boxes from Junos version 8.4 to
> > We have tried the usual upgrade procedure in a lab with direct migration
> > 9.2. We had quite a few problems like standby RE didn't come up at all
> > had to downgrade both REs to 8.4).
> > What are your experiences with upgrading from 8.4?
> > After getting not best results from lab tests, we are thinking about
> > upgrading to 8.5 and then to 9.2. What should be best practice for
> > to 9.2?
> > Regards,
> > Robert
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp