[j-nsp] ERX DHCP MIB?

[Bjørn Mork]

Bjorn Tore Paulen <bt at paulen.net> writes:

> RIPE is eager to know the number of IPs I use at a given time. I can graph
> percent of pool (MRTG -> juniDhcpLocalServerPoolUtilPct), but it seems that
> the OID I want isn't supported. Could this be a version issue? I run 8.2.3.
>
> Regarding http://www.oidview.com/mibs/4874/Juniper-DHCP-MIB.html the OID I'd
> want probably is 
> 	juniDhcpLocalServerPoolInUse (1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.19)

How about using juniAddressPoolInUse from
http://www.oidview.com/mibs/4874/Juniper-ADDRESS-POOL-MIB.html
instead?

we don't use dhcp local server, but I assume the results will be the
same as for ppp:

bjorn at server:~$ snmpwalk -v2c -c comm router .1.3.6.1.4.1.4874.2.2.21.1.1.1.1
Juniper-ADDRESS-POOL-MIB::juniAddressPoolRowStatus.1 = INTEGER: active(1)
Juniper-ADDRESS-POOL-MIB::juniAddressPoolName.1 = STRING: "adsl"
Juniper-ADDRESS-POOL-MIB::juniAddressPoolStart.1 = IpAddress: 0.0.0.0
Juniper-ADDRESS-POOL-MIB::juniAddressPoolEnd.1 = IpAddress: 0.0.0.0
Juniper-ADDRESS-POOL-MIB::juniAddressPoolSize.1 = INTEGER: 3574
Juniper-ADDRESS-POOL-MIB::juniAddressPoolInUse.1 = INTEGER: 2213
Juniper-ADDRESS-POOL-MIB::juniAddressPoolHighUtilThreshold.1 = INTEGER: 85
Juniper-ADDRESS-POOL-MIB::juniAddressPoolAbatedUtilThreshold.1 = INTEGER: 75
Juniper-ADDRESS-POOL-MIB::juniAddressPoolUtilPct.1 = INTEGER: 61
Juniper-ADDRESS-POOL-MIB::juniAddressPoolTrapEnable.1 = INTEGER: false(2)
Juniper-ADDRESS-POOL-MIB::juniAddressPoolNextPoolProfileIndex.1 = INTEGER: 0


Bjørn