[j-nsp] M10i - %KERN-1-RT_PFE: RT msg op 1 (PREFIX ADD) failed, err 6 (No Memory) / RT msg op 3 (PREFIX CHANGE) failed, err 6 (No Memory)

[listensammler at gmx.de]

Hi List,

i have a problem on one of our M10i.
System log continously shows following errors:

Jan 19 15:59:03 MYROUTER /kernel: %KERN-1-RT_PFE: RT msg op 3 (PREFIX 
CHANGE) failed, err 5 (Invalid)
Jan 19 15:59:03 MYROUTER /kernel: %KERN-1-RT_PFE: RT msg op 1 (PREFIX 
ADD) failed, err 6 (No Memory)
Jan 19 15:59:07 MYROUTER /kernel: %KERN-1-RT_PFE: RT msg op 3 (PREFIX 
CHANGE) failed, err 6 (No Memory)
Jan 19 15:59:15 MYROUTER /kernel: %KERN-1-RT_PFE: RT msg op 1 (PREFIX 
ADD) failed, err 6 (No Memory)
Jan 19 15:59:23 MYROUTER /kernel: %KERN-1-RT_PFE: RT msg op 3 (PREFIX 
CHANGE) failed, err 5 (Invalid)
Jan 19 15:59:27 MYROUTER /kernel: %KERN-1-RT_PFE: RT msg op 1 (PREFIX 
ADD) failed, err 6 (No Memory)
Jan 19 15:59:27 MYROUTER /kernel: %KERN-1-RT_PFE: RT msg op 3 (PREFIX 
CHANGE) failed, err 5 (Invalid)
Jan 19 15:59:30 MYROUTER /kernel: %KERN-1-RT_PFE: RT msg op 1 (PREFIX 
ADD) failed, err 6 (No Memory)

But there is no traffic impact....
I tried further investigation with some commands i found in older mailings.
But without success...

user at MYROUTER> start shell pfe network cfeb0
vty: connect: Connection refused
 
user at MYROUTER> start shell   
% su -
Password:
root at MYROUTER% vty ssb
vty: connect: Connection refused
root at MYROUTER%

I could imagine that a reload will clear the problem, but i would like 
to avoid it...
Did somebody know this issue ?

Thanks
Regards,
alex