[j-nsp] Add vlan to multiple interfaces on EX series

[Cord MacLeod]

Park yourself in edit vlans vlan xxx

The run this on your local Linux machine:

for i in `seq 0 23`; do echo set interface ge-0/0/$i; done

That's the way I mass edit.


On Jul 2, 2009, at 6:18 PM, Matt Stevens wrote:

> Sigh...from everyone's answers it appears the short answer to this  
> question
> is no.
>
> I guess I'll take this up with my account team.
>
> Thanks everyone!
> -- 
> matt
>
>
> On 7/2/09 12:25 PM, "Matt Stevens" <matt at elevate.org> wrote:
>
>> Is there an easy way to add a new VLAN to multiple interfaces on  
>> the EX
>> series switches? I'd like to be able to use a port range for both  
>> adding
>> vlans to trunk ports and putting access ports into a specific vlan.
>>
>> Both seem to only allow actions to be performed on a single port at  
>> a time.
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp