[j-nsp] BGP Route Announcement

[David Ball]

   Nothing fancy about it, really.  Just make sure your export
policies facing your upstream(s) allow that /24, that your upstream(s)
are allowing the /24, and as long as its in your routing table, you
should be successfully exporting it to them.

David


2009/7/10 Steve Coleman <scoleman2 at csolutions.net>:
> We an aggregate command on our M10i's to announce one of our ARIN CIDR blocks.  In this case it's a /19.
>
> There is a /24 within this /19 that I would like to announce as a separate route.
>
> That is, I'd like to announce both the /24 and the /19 that the /24 resides within.  This way I can force traffic for the /24 down a certain link since it's a more specific route.
>
> I am unsure how to accomplish this?  Any pointers would be greatly appreciated.
>
> Thanks,
>
> Steve
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>