[j-nsp] DHCP static bindings on J2320
Alexander Shikoff
minotaur at crete.org.ua
Thu Jul 16 06:51:37 EDT 2009
Hello,
I'm using J2320 (JunOS 9.5R1.8) as a router in office network with ~10 VLANs.
DHCP works good on it but there is confusing issue with DHCP static bindings.
I've configured binding:
minotaur at cr1-kur.ki> show configuration system services dhcp static-binding 00:40:01:27:e2:87
fixed-address {
10.3.1.143;
}
router {
10.3.1.129;
}
But when device reboots it still receives IP address from dynamic pool:
minotaur at cr1-kur.ki> show system services dhcp binding detail | match 00:40:01:27:e2:87
10.3.1.143 00:40:01:27:e2:87 static never active
10.3.1.184 00:40:01:27:e2:87 dynamic 2009-08-15 11:11:18 EEST active
Well, I tried to clear dynamic lease, then rebooted device again, but without
any effect: device still receives IP address from dynamic pool in spite of fact
that static binding is configured.
Any help is kindly appreciated! Thanks.
--
MINO-RIPE
More information about the juniper-nsp
mailing list