[j-nsp] Junos 9.3r3.8 BGP

[Ivan c]

Hi

Having a issue getting my J6350 to play BGP with a partners Cisco
router. I defined the local loopback address in the bgp config and
also with the router-id statement, but I am seeing a strange error
defined below - bascially the local address can't be found. The traces
just show the connection attyempts.

I did a a capture on the box and I saw the syn from the juniper, the
syn-ack from the cisco, but no ack back from the juniper. I tried the
path-mtu discovery option to see if it was a MSS issues, but no luck

appreciate any advice

set protocols bgp group bgp-ext type external
set protocols bgp group bgp-ext traceoptions file bgp-trace
set protocols bgp group bgp-ext traceoptions flag all
set protocols bgp group bgp-ext multihop ttl 254
set protocols bgp group bgp-ext local-address 20x.xxx.xxx.xxx
set protocols bgp group bgp-ext hold-time 64800
set protocols bgp group bgp-ext import bgp-policy
set protocols bgp group bgp-ext neighbor 150.xxx.xxx.xxx
authentication-key <key>
set protocols bgp group bgp-ext neighbor 150.xxx.xxx.xxx peer-as 6xxxx
set protocols bgp group bgp-ext neighbor 150.xxx.xxx.xxx
authentication-key <key>
set protocols bgp group bgp-ext neighbor 150.xxx.xxx.xxx peer-as 6xxxx

Jul 21 06:28:30  router rpd[1134]: Feature "BGP Route Reflection to
IBGP peers" (18) disabled due to lack of valid license
Jul 21 06:28:30  router rpd[1134]: bgp_peer_init: BGP peer
150.xxx.xxx.xxx (External AS 6xxxx) local address 20x.xxx.xxx.xxx not
found.  Leaving peer idled
Jul 21 06:28:30  router rpd[1134]: bgp_peer_init: BGP peer
150.xxx.xxx.xxx (External AS 6xxxx) local address 20x.xxx.xxx.xxx not
found.  Leaving peer idled
Jul 21 06:28:30  router  rpd[1134]: RPD_TASK_BEGIN: Commencing routing
updates, version 9.3R3.8, built 2009-05-12 22:37:06 UTC by builder

thanks
Ivan