[j-nsp] Problem with VPLS and J-series routers
Nugroho WH Adisubrata
adisubrata at gmail.com
Thu Jul 23 13:23:20 EDT 2009
Hi Tomasz,
I guess VPLS LDP is not supported on J-series at the moment.
Please look at this document:
http://www.juniper.net/techpubs/software/junos-security/junos-security95/junos-security-swconfig-interfaces-and-routing/vpls-exceptions-jseries-section.html
Am I missing something ??
2009/7/23 Tomasz Klicki <tomasz at klicki.pl>
> Hi there,
> I'm trying to configure VPLS between two J2320 routers (Junos 9.5R2.7).
> Topology looks like this:
>
> PC1 (tagged vlan) --- J1 --- J2 --- J3 --- J4 --- PC2 (tagged vlan)
>
> ..but as you may presume not everything works correct.
>
> Output from 'show vpls connections' on J1:
>
> root at J1> show vpls connections
> Instance: vpls1
> VPLS-id: 100
> Neighbor Type St Time last up # Up trans
> 192.168.5.4(vpls-id 100) rmt Up Jul 23 19:17:06 2009 1
> Remote PE: 192.168.5.4, Negotiated control-word: No
> Incoming label: 262145, Outgoing label: 262145
> Local interface: lsi.1049344, Status: Up, Encapsulation: ETHERNET
> Description: Intf - vpls vpls1 neighbor 192.168.5.4 vpls-id 100
>
> Looks good, but no packet is passing from PC1 to PC2. Can anyone tell me
> what I do wrong? I'm not sure about configuration of encapsulation of
> access ports for PC1 and PC2. Interface lsi.1049344 also looks strange
> to me, it has no input/output packets:
>
> root at J1> show interfaces lsi.1049344
> Logical interface lsi.1049344 (Index 73) (SNMP ifIndex 156)
> Flags: Point-To-Point SNMP-Traps Encapsulation: LSI-NULL
> Input packets : 0
> Output packets: 0
> Security: Zone: trust
> Allowed host-inbound traffic : any-service bfd bgp dlsw dvmrp igmp
> ldp msdp
> nhrp ospf pgm pim rip router-discovery rsvp sap vrrp
> Protocol vpls, MTU: 1496
> Flags: None
>
>
> ========= Essential configuration from J1 =========
>
> protocols {
> rsvp {
> interface ge-0/0/0.0;
> interface ge-0/0/1.0;
> }
> mpls {
> label-switched-path J1-to-J4 {
> to 192.168.5.4;
> no-cspf;
> }
> interface ge-0/0/0.0;
> interface ge-0/0/1.0;
> }
> ospf {
> traffic-engineering;
> area 0.0.0.0 {
> interface ge-0/0/0.0;
> interface ge-0/0/1.0;
> interface lo0.0;
> }
> }
> ldp {
> transport-address router-id;
> interface ge-0/0/0.0;
> interface ge-0/0/1.0;
> interface lo0.0;
> }
> }
> routing-instances {
> vpls1 {
> instance-type vpls;
> interface ge-0/0/2.0;
> protocols {
> vpls {
> no-tunnel-services;
> vpls-id 100;
> neighbor 192.168.5.4;
> }
> }
> }
> }
> interfaces {
> [...]
> ge-0/0/2 {
> description Access-port for PC1;
> vlan-tagging;
> encapsulation vlan-vpls;
> unit 0 {
> encapsulation vlan-vpls;
> vlan-id 600;
> }
> }
> lo0 {
> unit 0 {
> family inet {
> address 192.168.5.1/32;
> }
> }
> }
> }
>
> ========= Essential configuration from J4 =========
>
> interfaces {
> [...]
> ge-0/0/2 {
> description Access-port for PC2;
> vlan-tagging;
> encapsulation vlan-vpls;
> unit 0 {
> encapsulation vlan-vpls;
> vlan-id 600;
> }
> }
> lo0 {
> unit 0 {
> family inet {
> address 192.168.5.4/32;
> }
> }
> }
> }
> routing-options {
> static {
> route 0.0.0.0/0 next-hop 213.135.51.1;
> }
> router-id 192.168.5.4;
> }
> protocols {
> rsvp {
> interface ge-0/0/0.0;
> interface ge-0/0/1.0;
> }
> mpls {
> label-switched-path J4-to-J1 {
> to 192.168.5.1;
> no-cspf;
> }
> interface ge-0/0/0.0;
> interface ge-0/0/1.0;
> }
> ospf {
> traffic-engineering;
> area 0.0.0.0 {
> interface ge-0/0/0.0;
> interface ge-0/0/1.0;
> interface lo0.0;
> }
> }
> ldp {
> transport-address router-id;
> interface ge-0/0/0.0;
> interface ge-0/0/1.0;
> interface lo0.0;
> }
> }
> routing-instances {
> vpls1 {
> instance-type vpls;
> interface ge-0/0/2.0;
> protocols {
> vpls {
> no-tunnel-services;
> vpls-id 100;
> neighbor 192.168.5.1;
> }
> }
> }
> }
>
> --
> (o_ Best regards,
> //\ Tomasz Klicki
> V_/_
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
More information about the juniper-nsp
mailing list