[j-nsp] Problem with VPLS and J-series routers

[Thiago Drechsel]

Hi Tomas.

AFAIK, VPLS needs Tunnel Service PIC (In this case, you'd have "vt"
interface, instead of "lsi" interface) 
More info about virtual ports:

http://www.juniper.net/techpubs/software/junos/junos95/swconfig-vpns/id-11490128.html

If you don't have TS PIC, you can use no-tunnel-services command (I can
see you're using it) but the problem here is that you'll need enhanced
FPCs. 

I not sure about J-series, but I would say that you're facing a hw
related issue.

Hope it helps.

Best regards.

-- 
Thiago