[j-nsp] Zero counters for destination-class

[Alexander Shikoff]

On Wed, Jul 29, 2009 at 09:12:26PM +0530, Nalkhande Tarique Abbas wrote:
> 
> What platform & Junos? AFAIK, DCU filters wont work on output on
> T-series, M120, & M320 routing platforms b'cos the source class and
> destination classes are not carried across the platform fabric.
M10i with 9.5

It seems I've found an error in configuration.
I've deleted accounting source-class-usage output from upstreams' interfaces
and it began to count.
 
> 
>  
> Thanks & Regards,
> Tarique A. Nalkhande
> 
> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Alexander
> Shikoff
> Sent: Wednesday, July 29, 2009 8:47 PM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] Zero counters for destination-class
> 
> Hello,
> 
> I have a problem with configuring DCU for my customer's interface.
> We split all traffic from/to customer into two classes:
> 
> minotaur at br1-gdr.ki> show configuration policy-options policy-statement
> Mark-FT 
> term World {
>     from interface [ ge-0/0/0.403 ge-0/0/0.1252 ];
>     then {
>         destination-class to-World;
>         source-class from-World;
>         accept;
>     }
> }
> term UA-IX {
>     from interface [ ge-0/0/0.401 ge-0/0/0.1012 ];
>     then {
>         destination-class to-UAIX;
>         source-class from-UAIX;
>         accept;
>     }
> }
> term default {
>     then accept;
> }
> 
> minotaur at br1-gdr.ki> show configuration routing-options forwarding-table
> 
> export Mark-FT;
> 
> All prefixes in forwarding table is marked properly with classes :
> 
> minotaur at br1-gdr.ki> show route 3.0.0.0/8 extensive | match class: 
> Destination class: to-World
> Source class: from-World
> 
> On all interfaces faced to our upstreams accounting is configured as
> follows:
> minotaur at br1-gdr.ki> show configuration interfaces ge-0/0/0 unit 401
> family inet accounting 
> source-class-usage {
>     input;
>     output;
> }
> 
> On customer's interface accounting is configured as follows:
> minotaur at br1-gdr.ki> show configuration interfaces ge-0/0/0 unit 404
> family inet accounting 
> source-class-usage {
>     output;
> }
> destination-class-usage;
> 
> But counters for DCU on customer's interface are zeros:
> minotaur at br1-gdr.ki> show interfaces ge-0/0/0.404 statistics
> 
>   Logical interface ge-0/0/0.404 (Index 72) (SNMP ifIndex 208) 
> [...]
>       Flags: No-Redirects, DCU, SCU-out
>                                                Packets
> Bytes
>       Destination class            (packet-per-second)
> (bits-per-second)
> 
>                           to-UAIX                    0
> 0
>                                   (                  0) (
> 0)
>                          to-World                    0
> 0
>                                   (                  0) (
> 0)
>                                                Packets
> Bytes
>       Source class                 (packet-per-second)
> (bits-per-second)
> 
>                         from-UAIX               172488
> 22956232
>                                   (                102) (
> 103505)
>                        from-World               559708
> 212043472
>                                   (                566) (
> 2138642)
> 
> [...]
> 
> Any help will be appreciated! Thanks.
> 
> -- 
> MINO-RIPE
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

-- 
MINO-RIPE