[j-nsp] Missing bytes on traffic monitoring (Maximum 60 bytes)

[Nugroho WH Adisubrata]

Hi Richard,
Yes, this does happen only on output packet.
After put "extensive" in the monitoring command, I haven't seen missing
bytes anymore.

Thanks for comment.


Regards,
Nugroho

On Mon, Jun 8, 2009 at 12:53 PM, Richard A Steenbergen <ras at e-gerbil.net>wrote:
>
>
> Add "extensive" to your monitor traffic, see if you can get a complete
> copy of the packet it doesn't like. IIRC this message (the one with "%d
> bytes missing" specifically) only happens if the length in the IP header
> doesn't agree with the length of the original packet as it was presented
> to tcpdump (so regardless of snaplen). Also, does this happen only on
> output packets?
>
> --
> Richard A Steenbergen <ras at e-gerbil.net>       http://www.e-gerbil.net/ras
> GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)
>