[j-nsp] Destination NAT with Junos 9.5

[陈江]

JUNOS 9.6 will increase the limitation to 256 and even more in future
release.

On Thu, Jun 11, 2009 at 10:55 AM, Ben Dale <bdale at comlinx.com.au> wrote:

> I have run into this issue in the past - one hack I have used to work
> around it is to configure for example 8 rules of destination NAT and then 8
> rules of static NAT.  The static NAT takes away your ability to specify
> port, but you could use policies to limit the traffic allowed through (but
> not perform PAT though).
>
> Cheers,
>
> Ben
>
>
>
>
> On 10/06/2009, at 11:10 PM, Alexander Shikoff wrote:
>
> Hello!
>
> I have J2320 with JunOS 9.5, one external interface with one IP-address.
> I wish to make destination NAT for 12 different hosts in my internal
> network,
> for example
> <external IP> port 5000         -> <local IP1> port 5000
> <external IP> port 5001         -> <local IP2> port 5001
> [...]
>
> But one rule-set can contain only 8 rules. If I split all 12 rules in some
> rule-sets, then I get an error
> "error: Destination NAT rule-set NAT-Prime and NAT-DOM have same context."
>
> Is there a way to solve this? Thanks.
>
> --
> MINO-RIPE
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
BR!



          James Chen