[j-nsp] New flash card in M7i

[Dan Evans]

Power down the router and insert the flash card. After you reboot just issue
the command:

request system snapshot partition


-Dan




On Tue, Mar 3, 2009 at 9:57 AM, Matthias Gelbhardt <matthias at commy.de>wrote:

> Hi!
>
> I would like to add a new 1 GB CF card in a M7i. I assume, there is none in
> that device at the moment:
>
> Filesystem              Size       Used      Avail  Capacity   Mounted on
> /dev/ad1s1a             217M        98M       102M       49%  /
> devfs                   1.0K       1.0K         0B      100%  /dev
> devfs                   1.0K       1.0K         0B      100%  /dev/
> /dev/md0                 23M        23M         0B      100%
>  /packages/mnt/jbase
> /dev/md1                 80M        80M         0B      100%
>  /packages/mnt/jkernel-8.5R3.4
> /dev/md2                8.8M       8.8M         0B      100%
>  /packages/mnt/jpfe-M7i-8.5R3.4
> /dev/md3                3.5M       3.5M         0B      100%
>  /packages/mnt/jdocs-8.5R3.4
> /dev/md4                 28M        28M         0B      100%
>  /packages/mnt/jroute-8.5R3.4
> /dev/md5                8.8M       8.8M         0B      100%
>  /packages/mnt/jcrypto-8.5R3.4
> /dev/md6                 37M        37M         0B      100%
>  /packages/mnt/jpfe-common-8.5R3.4
> /dev/md7                504M       8.0K       463M        0%  /tmp
> /dev/md8                504M       470K       463M        0%  /mfs
> /dev/ad1s1e              24M        20K        22M        0%  /config
> procfs                  4.0K       4.0K         0B      100%  /proc
> /dev/ad1s1f              18G       542M        16G        3%  /var
>
> So I need one to update to 9.3R2.
>
> Do I have to prepare the CF before injecting it into the router? Does it
> have to be formatted?
>
> Regards,
>
> Matthias
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>