[j-nsp] Nat on J Series ES

[Ian MacKinnon]

Hi All,

I am trying to get my head round nat on a J-series with enhanced services.

I am trying to configure this so that it uses the IP address of the 
outside interface for outgoing traffic
ie lan 10.0.0.0/24, Wan 66.66.66.2/30

Then I want all outgoing traffic from LAN to wan use 66.66.66.2

All I can find is using another ip address from a pool.
I don't want to assign another ip address to a customer, which will add 
complexity

I have read 
http://puck.nether.net/pipermail/juniper-nsp/2008-May/010335.html which 
uses a pool, but not the outgoing interface address

Thanks



--

This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the sender. Any
offers or quotation of service are subject to formal specification.
Errors and omissions excepted.  Please note that any views or opinions
presented in this email are solely those of the author and do not
necessarily represent those of Lumison and nPlusOne.
Finally, the recipient should check this email and any attachments for the
presence of viruses.  Lumison and nPlusOne accept no liability for any
damage caused by any virus transmitted by this email.