[j-nsp] Missing BGP Routes
Eric Van Tol
eric at atlantech.net
Tue Mar 17 15:02:58 EDT 2009
> -----Original Message-----
> From: Harry Reynolds [mailto:harry at juniper.net]
> Sent: Tuesday, March 17, 2009 1:46 PM
> To: Eric Van Tol; juniper-nsp
> Subject: RE: [j-nsp] Missing BGP Routes
> Normally an as path loop or other sanity check results in this state.
> From the config below does not seem this is the case. Perhaps add
> keep-all, restart/soft clear session, and then display hidden. Perhaps
> something will jump out.
> Does tracing show any errors when the routes are processed? Unreachable
> next hop normally is just hidden so does not seem the case here. Should
> not matter, but I normally doe not specify peer-as for an int group.
> Again should not break things but worth trying w/o.
So, I tried tracing again and you all were correct. There was a BGP group on edge01 with the cluster-id of 192.168.206.129, which was causing the route to drop. I believe my problem with tracing was that I was not tracing the right information and using a prefix filter under the 'route' flag.
Thanks to all who responded. I now know that routes with cluster-id issues will be dropped with no addition to the RIB.
More information about the juniper-nsp