[j-nsp] ENTITY-MIB replacement

[Truman Boyes]

Hi Michael,

Perhaps you may want to use the jnxBoxAnatomy MIB:

show snmp mib walk jnxBoxAnatomy

jnxBoxClass.0 = jnxProductLineM10i.0
jnxBoxDescr.0 = Juniper M10i Internet Backbone Router
jnxBoxSerialNo.0 = 30014
[snip]
jnxContentsSerialNo.2.1.0.0 = S/N PJ12468
jnxContentsSerialNo.2.1.1.0 = S/N PJ12468
jnxContentsSerialNo.2.2.0.0 = S/N PJ12808
jnxContentsSerialNo.2.2.1.0 = S/N PJ12808
jnxContentsSerialNo.2.3.0.0 = S/N PJ12464
jnxContentsSerialNo.2.3.1.0 = S/N PJ12464
[snip]

Cheers,
Truman Boyes


On 18/03/2009, at 1:27 AM, Michael Skulsky wrote:

> Hi,
>
> I was planning to use some fields from RFC2737 (ENTITY-MIB) for my  
> monitoring application; in particular entPhysicalSerialNum and  
> entPhysicalMfgName. To my surprise the  mx960 router does not seem  
> to have this MIB, documentation says that it is supported on E- 
> series routers only. Could you advice what MIB I should use instead?
>
>
> thanks
> Michael
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>