[j-nsp] BGP load-balancing

[Masood Ahmad Shah]

You don't need to configure per packet-load balance during the JNCIP-M lab.
All you have to do is multipath..

Regards,
Masood


-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Aamir Saleem
Sent: Tuesday, March 24, 2009 1:31 PM
To: Arda Balkanay
Cc: Juniper Puck
Subject: Re: [j-nsp] BGP load-balancing

This is what i am pointing to.... by enabling per packet-load balance we
able to load balance to RIP prefix. But in JNCIP-M study guide Book author
did't implement per-packet load balance in the case study solution. only
multipath is enable to load balnce the RIP prefix. is the statement given in
the case study of iBGP is Ambiguous or we have to explicity enable
per-packet load balnce to achive case study requirement?

Regards.

Aamir
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp