[j-nsp] OSPF NBMA

magno massimo.magnani at gmail.com
Sat Mar 28 13:33:00 EDT 2009

I couldn't understand if this issue is resolved... If not, try to
configure ospf using 'set protocol ospf area interface
a.b.c.d' (basically using ip address configured on the interface
instead of interface name)... I faced a similar issue and that
configuration fixed the problem.

  Hope this helps.


On 28/03/2009, Harry Reynolds <harry at juniper.net> wrote:
> Sorry I missed that. I believe its needed.
> -----Original Message-----
> From: Aamir Saleem [mailto:aamirwwol at gmail.com]
> Sent: Friday, March 27, 2009 9:11 PM
> To: Harry Reynolds
> Cc: Sean Clarke; Juniper Puck
> Subject: Re: [j-nsp] OSPF NBMA
> Dear Harry,
> Thanks for your response. As already mentioned in my emal that NBMA mdoe
> is working perfectly with multipoint interface configuration. without
> multipoint will this not work?
> Regards.
> Aamir
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

More information about the juniper-nsp mailing list