[j-nsp] RPD soft assertion failed

Richard A Steenbergen ras at e-gerbil.net
Wed May 27 11:16:37 EDT 2009

On Wed, May 27, 2009 at 11:49:28AM +0200, Daniel Verlouw wrote:
> Hi,
> anyone else seeing messages similar to the following? We started seeing
> several of these after upgrading one of our M120s to 9.3R3.8 last night.
> May 27 10:28:05.806 2009  jun1.bit-1 rpd[1149]: %
> DAEMON-3-RPD_ASSERT_SOFT: Soft assertion failed rpd[1149]: file
> "../../../../../src/juniper/usr.sbin/rpd/rt/rt_table.c", line 4732:
> "rt_notbest_sanity: Path selection failure on,

I had a similar issue (well the exact same message, but I'm assuming
different root causes) back in 8.2R2. It turned out to be PR99220, and
was mostly cosmetic (minus the big scary log message that looked like a
rpd core dump to the noclings). A soft assert doesn't break anything and
gives you a nice coredump to work with, open a case and they should be
able to identify the problem easily.

Richard A Steenbergen <ras at e-gerbil.net>       http://www.e-gerbil.net/ras
GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)

More information about the juniper-nsp mailing list