[j-nsp] Subject: Olive and l2circuit

[Junos Guy]

As to my understanding l2circuit just needs encap vlan-ccc on em...i can
unicast the configs.

As suggested earlier TCC/l2vpn/Vpls doesn't work.

On Fri, May 29, 2009 at 8:27 AM, Truman Boyes <truman at suspicious.org> wrote:

> fxp or em interfaces do not support family ccc or tcc.
>
>
>
> On 29/05/2009, at 1:48 AM, alaerte vidali wrote:
>
>  Hi Thiago,
>> What version are you using? If want, send the config (
>> alaertevidali at gmail.com) and I try on mine.
>> I tested L3VPN recently (works fine), but I heard something about
>> L2VPN/VPLS
>> does not work, as one person posted already.
>>
>> Br,
>> Alaerte
>>
>> On Thu, May 28, 2009 at 10:08 AM, <juniper-nsp-request at puck.nether.net
>> >wrote:
>>
>>
>>>  -----Original Message-----
>>>>> From: juniper-nsp-bounces at puck.nether.net [mailto:
>>>>>
>>>> juniper-nsp-bounces at puck.nether.net] On Behalf Of Thiago Drechsel
>>>>
>>>>> Sent: Wednesday, May 27, 2009 6:03 AM
>>>>> To: juniper-nsp at puck.nether.net
>>>>> Subject: [j-nsp] Olive and l2circuit
>>>>>
>>>>> Hi list.
>>>>>
>>>>> Was anybody able to configure/test l2circuit using olive running on
>>>>>
>>>> virtual machines?
>>>>
>>>>> A have a basic topology, for study purposes, everything is correctly
>>>>>
>>>> configured but traffic don't go through the pw.
>>>>
>>>>>
>>>>> Any similar experience on the list?
>>>>>
>>>>> Thank you!
>>>>>
>>>>> Thiago
>>>>> _______________________________________________
>>>>>
>>>>
>>>  _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>