[j-nsp] MX960 JunOS recommendations
Kari Asheim
ka at mork.no
Thu Nov 12 08:33:36 EST 2009
On Thu, Nov 12, 2009 at 01:45:22PM +0100, Krzysztof Szarkowicz wrote:
>
> The most common cause of dropping is mismatch of MPLS MTU, or L2 device with misconfigured MTUs
> somewhere in between.
Are you sur you mean MPLS MTU?
There is only one BGP session between a set of peers, even if you have
several address families. I always thought this used a regular L3
protocol like IP (could be exhanged with v6 in the future).
Kari
More information about the juniper-nsp
mailing list