[j-nsp] EX3200/EX4200 Rate-Limit

[Daniel Goscomb]

Hi

we have:


firewall {
    policer 500m {
        if-exceeding {
            bandwidth-limit 600m;
            burst-size-limit 15m;
        }
        then discard;
    }
    family inet {
        filter 500m-limit {
            term default {
                then policer 500m;
            }
        }
    }
}


dang at cs0.sov.uk# show interfaces ge-0/0/4  
description SERVER::mirror0.sov.uk;
unit 0 {
    family inet {
        filter {
            input 500m-limit;
        }
        address x.x.x.x/y;
    }
}


Cheers

Dan


> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-
> bounces at puck.nether.net] On Behalf Of Brendan Mannella
> Sent: 16 November 2009 16:35
> To: juniper-nsp
> Subject: [j-nsp] EX3200/EX4200 Rate-Limit
> 
> Upgrading to 9.3R4.4 seems to have broken my rate-limiting.
> 
> The switch is being used to aggregate colo customers, and i need to be
> able to create rate-limits for different speeds and apply them to
> different physical ports.
> 
> Can anyone provide a example config for this? I had..
> 
> firewall {
> policer 10m {
> ##
> ## Warning: statement ignored: unsupported platform (ex3200-48t)
> ##
> filter-specific;
> if-exceeding {
> bandwidth-limit 10m;
> burst-size-limit 100k;
> }
> then discard;
> }
> family ethernet-switching {
> filter rate-limit-10m {
> term 1 {
> then policer 10m;
> 
> Thanks,
> 
> Brendan Mannella
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp