[j-nsp] ASR1002 Comparitive

[Kris Amy]

This is an SRX240H running 10.0

Regards,
Kris


On 18/11/09 8:55 PM, "Mark Tinka" <mtinka at globaltransit.net> wrote:

> On Wednesday 18 November 2009 06:48:17 pm Kris Amy wrote:
> 
>> The plot thickens,
>> 
>> With sampling set to 1/100. The box is nominally at 50%.
>> 
>> However whenever we commit a config the box jumps to 100%
>> cpu for approx 10 minutes. We started seeing this when I
>> brought up 1 full bgp peer. My Partner has an open case
>> with JTAC for this and will let you know the results when
>> they come to hand.
> 
> Which box is this?
> 
> We've seen similar behaviour on an M7i/M10i running any
> version of JUNOS post 9.x.
> 
> Feedback from JTAC was that if an MS-PIC is not installed,
> recommend sampling rate be 1/1000. CFEB CPU seems to idle at
> about 8% following that.
> 
> Cheers,
> 
> Mark.