[j-nsp] ERX 1440 FE-8

[Truman Boyes]

Make sure that the FE-8 has 256MB of RAM. The FE-8 w/ 128MB is not supported past 5.2. 

If the line card the copper based one or the SFP one? If it's the SFP based one make sure you have Juniper supported SFPs, otherwise it will fail BPOST.

Truman


On 24/11/2009, at 1:46 PM, guan wang wrote:

> Hi All
> 
> Does anybody have experience on FE-8 ?
> I read the Junose doc and know the ERX 1440 suppport FE-8 module .
> But our ERX 1440 cannot see FE-8 module after I plug the it  into ERX 1440 .
> 
> 
> ERX1440-LNS1#sh ve | inc FE-
> Please wait...
> 10   core dumping FE-8     enabled  ---  erx40_10-0-1p0-3.rel      ---
> 
> ERX1440-LNS1#sh hardware | inc 10
> 2      GE/FE      4304512952   3500104554     A04      256
> 10       ???         ???          ???         ???      ---
> 6      SRP-40G+ I/O   4606121038   3500003302     A03          1
> 10         ???           ???          ???         ???         ???
> 
> Thanks
> Gdxnfx
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>