[j-nsp] JunOS, MPLS and WXC ISM 200

[Ivan c]

Hi,

Looking into enabling MPLS for some testing, but I haven't been able
to find any info as to whether a WXC card will function once a J6350
(v9.4) has had MPLS enabled? I am assuming that since the WXC operates
in session mode, the enabling of MPLS and packet mode would stop the
WXC from working?

I noted this on the doco site:

Caution: When MPLS is enabled on your router, all security features
such as security policies, zones, NAT, ALGs, chassis clustering,
screens, firewall authentication, and IPsec VPNs are unavailable. For
more information on the data path for security features, see JUNOS
Software Security Configuration Guide.
http://www.juniper.net/techpubs/software/junos-security/junos-security94/junos-security-swconfig-interfaces-and-routing/frameset.html


Thanks
Ivan