[j-nsp] EX Routing Throughput
Ralph.Smit at nxs.nl
Wed Oct 7 06:32:28 EDT 2009
EX is also not enforced. It generates an annoying message in the messages log, and raises an alarm, but it will work
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Patrik Olsson
Sent: woensdag 7 oktober 2009 11:31
To: Markus Groß
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] EX Routing Throughput
the license is honoured base I think. At least on M/T. It is enforced on
J series. EX is unclear to me...
> Patrik Olsson schrieb:
>>> One rather annoying thing you should be aware of is that you will need
>>> to purchase a separate license to run OSPFv3 (even though OSPFv2 is
>>> included in the base image).
>> I heard rumors that the IPv6 stuff will be free in later release of
>> JUNOS... at least for M/T stuff... so logically I hope EX stuff follows
>> that lead...
> some weeks ago I asked our sales if there are any news. He told me, that
> you need a license for IPv6 for the ex- as well as for the m-series. So
> I assume the situation hasn't changed yet.
> I hope Juniper will rethink this strategy. We would love to use our
> ex-series switches to deploy IPv6 to our customers, but this step
> would almost double the costs for each switch.
> I played a little bit in our lab and got a message that an additional
> license is needed when I actiated ospf v2. When I did the same stuff
> (added IPv6 addresses and configured route advertisement)
> with static routes, no warning appeared. I asked our sales, if this
> means that no license is required but he negated that.
> juniper-nsp mailing list juniper-nsp at puck.nether.net
juniper-nsp mailing list juniper-nsp at puck.nether.net
More information about the juniper-nsp