[j-nsp] RE0 SNMP Problem

[Walaa Abdel razzak]

Hi 

We have the following config:
 
groups {
    re0 {
        system {
            host-name M320-01-re0;
        }
        interfaces {
            fxp0 {
                unit 0 {
                    family inet {
                        address 172.16.255.11/24;
                    }
                }
            }
        }
    }
    re1 {
        system {
            host-name M320-01-re1;
        }
        interfaces {
            fxp0 {
                unit 0 {
                    family inet {
                        address 172.16.255.12/24;
                    }
                }
            }
        }
    }
}
apply-groups [ re0 re1 ];

As you can see, both interfaces are in the same subnets and we are using
group approach. When re1 is the master, the physical interface for re0
management fxp0 is still up, so why NMS can't poll from backup re.


Best Regards,
Walaa Abdel Razzak
                  
-----Original Message-----
From: Malte von dem Hagen [mailto:mvh at hosteurope.de] 
Sent: Sunday, October 18, 2009 2:37 PM
To: Walaa Abdel razzak
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] RE0 SNMP Problem

Hi,

Am 18.10.2009 13:17 Uhrschrieb Walaa Abdel razzak:
> We have M320 router, we are monitoring the router through out of band 
> interface on re0, when we switch the routing engine to the backup. The

> monitoring stop working, the NMS can't poll interfaces. I need to know

> the reason for this and if this relates to the snmpd activation on the

> backup re1?

how can mgmt traffic get to re1 in your setup, what do you think?

rgds,

.m

 

__________ Information from ESET Smart Security, version of virus
signature database 4388 (20090902) __________

The message was checked by ESET Smart Security.

http://www.eset.com