[j-nsp] Logical Interfaces 802.1ad

[Evgeniy Aikashev]

Also works fine:

{master}[edit interfaces xe-4/1/0]
evgeniy at mx480# show
description "=== Summit X650 test ===";
flexible-vlan-tagging;
encapsulation flexible-ethernet-services;
gigether-options {
    ethernet-switch-profile {
        tag-protocol-id 0x88a8;
    }
}
unit 100 {
    description "=== Summit X650 test ===";
    vlan-tags outer 0x88a8.4092 inner 100;
    family inet {
        address x.x.x.x/30;
    }
}

 Summit:
 enable jumbo-frame ports all


best regards,
-- 
Evgeniy Aikashev
network engineer
JSC DATAGROUP

Monday, October 19, 2009, 10:17:22 AM, Onam wrote:
> Hello Evgeniy,

> I made some test before with this ethertype and it works. The Extreme x450 use both of them
> 0x8100 for VLAN and 0x88a8 for VMAN so if i do that the VMAN will become a VLAN.

> I see that by default the Juniper router M10 use ethertype 0x8100, but when I try to use
> ethertype 0x88a8 the devices doens't see each other, I run a ping to the other side with no response.


>> Date: Mon, 19 Oct 2009 09:58:23 +0300
>> From: evgeniy at ip.datagroup.ua
>> To: onamrubio at hotmail.com
>> CC: juniper-nsp at puck.nether.net
>> Subject: Re: [j-nsp] Logical Interfaces 802.1ad
>> 
>> Hello Onam,
>> try to change ethertype from Summit side:
>> 
>> configure vman ethertype 0x8100
>> 
>> best regards,
>> -- 
>> Evgeniy Aikashev
>> network engineer
>> JSC DATAGROUP
>> 
>> Monday, October 19, 2009, 3:30:51 AM, Onam wrote:
>> 
>> > Hi experts,
>> 
>> > I want to make logical interfaces on a physical interface ge-0/2/0 of a Juniper M10 router to
>> > connected to a the trunk port of a Summit Extreme x450 with the ethertype 0x88a8 (IEEE 802.1ad).
>> 
>> > I have the following configuration on the router.
>> 
>> > ge-0/2/0 {
>> > vlan-tagging;
>> > gigether-options {
>> > ethernet-switch-profile {
>> > tag-protocol-id 0x88a8;
>> > }
>> > }
>> > unit 50 {
>> > vlan-tags outer 0x88a8.50;
>> > family inet {
>> > address 192.168.175.169/28;
>> > }
>> > }
>> > }
>> 
>> > I made the test with the 802.1q and it works but with 802.1ad didn't work.
>> 
>> > Best regards.
>> > 
>> > _________________________________________________________________
>> > News, entertainment and everything you care about at Live.com. Get it now!
>> > http://www.live.com/getstarted.aspx
>> > _______________________________________________
>> > juniper-nsp mailing list juniper-nsp at puck.nether.net
>> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>> 

> Get news, entertainment and everything you care about at Live.com. Check it out!