[j-nsp] Logical Interfaces 802.1ad

[Evgeniy Aikashev]

Hello Onam,
try to  change ethertype from Summit side:

configure vman ethertype 0x8100

best regards,
-- 
Evgeniy Aikashev
network engineer
JSC DATAGROUP

Monday, October 19, 2009, 3:30:51 AM, Onam wrote:

> Hi experts,

> I want to make logical interfaces on a physical interface ge-0/2/0 of a Juniper M10 router to
> connected to a the trunk port of a Summit Extreme x450 with the ethertype 0x88a8 (IEEE 802.1ad).

> I have the following configuration on the router.

> ge-0/2/0 {
>     vlan-tagging;
>     gigether-options {
>         ethernet-switch-profile {
>             tag-protocol-id 0x88a8;
>         }
>     }
>     unit 50 {
>         vlan-tags outer 0x88a8.50;
>         family inet {
>             address 192.168.175.169/28;
>         }
>     }
> }

> I made the test with the 802.1q and it works but with 802.1ad didn't work.

> Best regards.
>                                           
> _________________________________________________________________
> News, entertainment and everything you care about at Live.com. Get it now!
> http://www.live.com/getstarted.aspx
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp