[j-nsp] Compatibilty between FPC and E-FPC

[Jonas Frey]

Hello,

yes thats perfectly possible.

But take care, beginning with JunOS 9.2 (iirc) the old FPC is no longer
supported AND will not work, only E-FPC will work.

Regards,
Jonas

On Mon, 2009-10-19 at 13:02, iber-x wrote:
> Hi all,
> 
> does Juniper support an FPC and E - FPC at the same time within a M20?. 
> Attached the ouput of show chassis fpc detail command and note that 
> versions of I/O Manager ASIC information are different.
> 
> Slot 0 information:
> 
> State Online
> 
> Logical slot 0
> 
> Temperature 26 degrees C / 78 degrees F
> 
> Total CPU DRAM 32 MB
> 
> Total SRAM 2 MB
> 
> Total SDRAM 128 MB
> 
> Total notification SDRAM 24 MB
> 
> I/O Manager ASIC information Version 3.0, Foundry IBM, Part number 0
> 
> Start time 2009-06-06 18:52:23 CEST
> 
> Uptime 131 days, 16 hours, 4 minutes, 11 seconds
> 
> 
> Slot 1 information:
> 
> State Online
> 
> Logical slot 1
> 
> Temperature 27 degrees C / 80 degrees F
> 
> Total CPU DRAM 8 MB
> 
> Total SRAM 1 MB
> 
> Total SDRAM 128 MB
> 
> Total notification SDRAM 24 MB
> 
> I/O Manager ASIC information Version 2.0, Foundry IBM, Part number 0
> 
> Start time 2009-10-15 11:17:34 CEST
> 
> Uptime 23 hours, 39 minutes
> 
> 
> Thanks
> 
> Emilio
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp