[j-nsp] class-of-service configuration on GE PIC

[Benny Sumitro]

What is the error? Could you paste it? I have an aggregate ethernet running
and using CoS just fine.
Regards,
Benny

On Thu, Oct 22, 2009 at 2:47 AM, Brahim Sagou <brahim.sagou at gmail.com>wrote:

> Hi all,
> I am trying to configure aggregate interface (an aggregate of 2 GE
> interfaces) under <class-of-service interface  ...> statement in order to
> put scheduling but these interfaces seem not configurable.
> I am suspecting a hardware issue but not sure about that.. I am trying to
> configure a M120 router, with M120 FPC Type 2 , and the PICs are PB-4GE-SFP
> (non IQ PICs). I am running 9.3 software.
> What I clearly found is that per-unit scheduling is not supported on
> aggregated interfaces.
> I also found that per-unit scheduling on GE interfaces requires IQ PICs.
> But nothing about scheduling on simple GE/aggregate interfaces
> Any idea about that?
> Thanks very much
> Regards,
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>