[j-nsp] rewrite-rules for mpls packet

[Abel Alejandro]

Hello,

I have two Juniper MPLS routers (M10i and SRX210) interconnected via a
bunch of Ethernet switches. 
In the M10i I will have a 801.p classifier on the ingress interface of
my VPLS and would like to
have a rewrite-rule so all VPLS packets exiting into the SRX210 are
marked with the proper EXP 
values but I also need to set the 801.p bit for the Ethernet switches
interconnecting the PE's. 
The question can I have a rewrite-rule so packets are marked with both a
801.p bit and EXP bit?

Thanks,
Abel.