[j-nsp] GRE tunnel interoperability Juniper-Cisco

Benny Sumitro benny.sumitro at gmail.com
Tue Sep 15 23:43:12 EDT 2009

Hi All,

Thanks for the feedback. I want to make sure that there is no configuration
problem or interop issue between them.

Best regards,

On Tue, Sep 15, 2009 at 8:17 PM, Georgios Vlachos
<g.vlachos at kestrel-is.gr>wrote:

> Works fine also between SSG series and Cisco enterprise routers...
> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of
> sthaug at nethelp.no
> Sent: Tuesday, September 15, 2009 3:40 PM
> To: benny.sumitro at gmail.com
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] GRE tunnel interoperability Juniper-Cisco
> > Has anyone had experience in configuring GRE tunnel between Juniper and
> > Cisco devices?
> Works just fine, with a standard tunnel PIC (integrated on M7i and MX).
> If you want to use a tunnel key you need a services PIC.
> Steinar Haug, Nethelp consulting, sthaug at nethelp.no
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

More information about the juniper-nsp mailing list