[j-nsp] cannot see hard disk

[Shankar]

can you check if you have hard-dish using the following commands:

show chassis hardware details
show system boot-messaages...

if not, you should have seen some hardware errors or logs relating to
hard-disk..if yes, replace the RE...

cheers

On Thu, Sep 24, 2009 at 12:20 PM, Erol KAHRAMAN <erol.kahraman at gmail.com>wrote:

> Hi all,
>
> I have m7i box. It restarted today and hard disk went off. I cannot see it
> in my storage devices.
>
> Router1> show system storage
> Filesystem              Size       Used      Avail  Capacity   Mounted on
> /dev/ad0s1a             217M        61M       139M       30%  /
> devfs                    16K        16K         0B      100%  /dev/
> /dev/vn0                 16M        16M         0B      100%
>  /packages/mnt/jbase
> /dev/vn1                 65M        65M         0B      100%
>  /packages/mnt/jkernel-8.4R1.13
> /dev/vn2                8.5M       8.5M         0B      100%
>  /packages/mnt/jpfe-M7i-8.4R1.13
> /dev/vn3                2.6M       2.6M         0B      100%
>  /packages/mnt/jdocs-8.4R1.13
> /dev/vn4                 22M        22M         0B      100%
>  /packages/mnt/jroute-8.4R1.13
> /dev/vn5                8.0M       8.0M         0B      100%
>  /packages/mnt/jcrypto-8.4R1.13
> /dev/vn6                 14M        14M         0B      100%
>  /packages/mnt/jpfe-common-8.4R1.13
> mfs:136                  62M       1.0K        57M        0%  /tmp
> mfs:150                  62M        16M        41M       28%  /mfs
> /dev/ad0s1e              24M        18K        22M        0%  /config
> procfs                  4.0K       4.0K         0B      100%  /proc
>
> How i can get it back. Any idea?
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>