[j-nsp] ipv6 routing

Jana Kennedy jkennedy at juniper.net
Thu Apr 1 12:52:57 EDT 2010


Is this interface in a routing instance by chance?  If so, you would need to run the command "show ospf neighbor instance blah".  That's the only time I've ever seen the "ospf instance not running" error.

 
....................................
Jana Kennedy
Resident Engineer

m  +1 303-888-1767
jkennedy at juniper.net
www.juniper.net 
 
-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Antonio Querubin
Sent: Thursday, April 01, 2010 7:41 AM
To: Ramesh Karki
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] ipv6 routing

On Thu, 1 Apr 2010, Ramesh Karki wrote:

> Is your ospf config similar for both IPv4 and IPv6?
> Do we need to configure similarly on both v4 and v6 ! some interfaces that

No.  I'm asking only to determine whether OSPF for IPv4 is running at all 
on the same interface or even on other interfaces.

Antonio Querubin
808-545-5282 x3003
e-mail/xmpp:  tony at lava.net
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp



More information about the juniper-nsp mailing list