[j-nsp] ipv6 routing

[Nilesh Khambal]

can you show us your ospf and ospf3 configuration? Also, have you specified router-id under routing-options?

Thanks,
Nilesh

-----Original Message-----

From:  "Ramesh Karki" <rameshkarki at gmail.com>
Subj:  Re: [j-nsp] ipv6 routing
Date:  Sat Apr 3, 2010 10:52 pm
Size:  1K
To:  "mtinka at globaltransit.net" <mtinka at globaltransit.net>
cc:  "Antonio Querubin" <tony at lava.net>; "juniper-nsp at puck.nether.net" <juniper-nsp at puck.nether.net>

Hi Mark, 
 
As I have already mentioned, the same interface fe-0/1/0 has been configured 
to run both ospf and ospf3 and there is no any issue on ospf v4 from the 
beginning. 
 
> show ospf interface fe-0/1/0.0 
Interface           State   Area            DR ID           BDR ID 
 Nbrs 
fe-0/1/0.0          BDR     0.0.0.10         x.x.192.4    x.x.192.1       1 
 
but the same interface configured for ospf3 outcome is unexpected. 
 
> show ospf3 interface fe-0/1/0.0 
   OSPF instance is not running 
 
Thank you, 
Ramesh 
 
 
On Sat, Apr 3, 2010 at 9:25 AM, Mark Tinka <mtinka at globaltransit.net> wrote: 
 
> On Friday 02 April 2010 04:17:15 am Antonio Querubin wrote: 
> 
> > show ospf interface fe-0/1/0.something 
> > 
> > show ospf3 interface fe-0/1/0.something 
> 
> Ramesh, did you get a chance to run the commands above as 
> requested by Antonio? 
> 
> I'm curious to see what's going on here, especially since, 
> for all intents and purposes, your configuration looks 
> alright. 
> 
> Cheers, 
> 
> Mark. 
> 
_______________________________________________ 
juniper-nsp mailing list juniper-nsp at puck.nether.net 
https://puck.nether.net/mailman/listinfo/juniper-nsp