[j-nsp] erase configuration
Bill Blackford
BBlackford at nwresd.k12.or.us
Sun Apr 25 11:37:00 EDT 2010
Router# load factory-default
It's good to have a rescue config if you don't wish to do a complete factory default. This assumes you creatred one. I've found that Ver 10.0 forces you to create one (generates alarms).
Router> request system configuration rescue
-b
-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of David water
Sent: Sunday, April 25, 2010 7:39 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] erase configuration
What is equivalent of wire erase in JUNOS?
--
David W.
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list