[j-nsp] virtual-chassis and interfaces

[snort bsd]

just configure them? under interface stanze of each member of the virtual-chassis?

--- On Sat, 7/8/10, Piotr Bratkowski <pioterbrat at o2.pl> wrote:

> From: Piotr Bratkowski <pioterbrat at o2.pl>
> Subject: Re: [j-nsp] virtual-chassis and interfaces
> To: juniper-nsp at puck.nether.net
> Received: Saturday, 7 August, 2010, 5:23 AM
>  Hi,
> 
> Just configure them.  Just remember about naming
> convention.
> 
> Regards,
> Piotr Bratkowski
> 
> 
> 
> 
> W dniu 2010-08-06 21:00, snort bsd pisze:
> > Hi all:
> >
> > With virtual-chassis, after I login, I only see
> interfaces (under stanza "interfaces") on master, not those
> interfaces on the back up mode or line card mode.
> >
> > How could I configure those interfaces that are not on
> master? do I have to login each physical switch in order to
> configure those interfaces?
> >
> >
> >       
> >
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>