[j-nsp] virtual-chassis and interfaces

[Dan Farrell]

I see the same thing on fresh configs - once I define something on one  
of those interfaces, it shows up.

Dan Farrell


Sent from my iPhone

On Aug 6, 2010, at 4:45 PM, "Stefan Fouant" <sfouant at shortestpathfirst.net 
 > wrote:

>> -----Original Message-----
>> From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-
>> bounces at puck.nether.net] On Behalf Of snort bsd
>> Sent: Friday, August 06, 2010 3:01 PM
>> To: juniper-nsp
>> Subject: [j-nsp] virtual-chassis and interfaces
>>
>> Hi all:
>>
>> With virtual-chassis, after I login, I only see interfaces (under
>> stanza "interfaces") on master, not those interfaces on the back up
>> mode or line card mode.
>>
>> How could I configure those interfaces that are not on master? do I
>> have to login each physical switch in order to configure those
>> interfaces?
>
> They might not necessarily show up in the configuration until you  
> actually
> define them... it depends on how they were brought into the virtual- 
> chassis.
> However if your Virtual-Chassis is set up correctly, they should  
> still show
> up when you do a 'show interfaces terse'.  The FPC portion of the  
> interface
> naming convention is what is used to identify the interfaces on a  
> given
> virtual-chassis member.  In other words, interfaces on member-id 2  
> will show
> up in 'show interfaces terse' as ge-2/x/x or xe-2/x/x.
>
> You can verify that your virtual-chassis is working correctly by  
> doing a
> 'show virtual-chassis status', or even a 'show chassis hardware'  
> will give
> you a clue as to whether or not all the members are shown in the
> virtual-chassis.
>
> HTHs.
>
> Stefan Fouant, CISSP, JNCIEx2
> www.shortestpathfirst.net
> GPG Key ID: 0xB5E3803D
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp