[j-nsp] Dialup VPN on SRX

[Fahad Khan]

Can you please share the configs and steps did you follow using NCP??

regards,
Muhammad Fahad Khan
JNCIP - M/T # 834
IT Specialist
Global Technology Services, IBM
fahad at pk.ibm.com
+92-301-8247638
Skype: fahad-ibm
http://pk.linkedin.com/in/muhammadfahadkhan


On Thu, Aug 5, 2010 at 6:25 AM, Rob Cameron <rcameron at juniper.net> wrote:

> That is correct. However NetScreen Remote can work. There are several
> alternative solutions out there. We have tested the NCP client and Shewnet.
> Both work well with the SRX. We tend to focus on NCP as the preferred client
> as its an official product with support mechanisms.
>
> Rob Cameron
> Technical Marketing Engineer - HSS
> http://easylink.juniper.net/fwidpwiki
> SLT-HSS-TME - Team Alias
> (408) 905-9651
> robc at juniper.net
> www.juniper.net
>
>
>
>
> On Aug 4, 2010, at 8:45 AM, Fahad Khan wrote:
>
> Dear Folks,
>
> Neither Netscreen Remote Client nor Junos Pulse is supported on SRX 3600
>
> Please correct me if I am wrong
>
> thanks in adv
>
> regards,
>
> Muhammad Fahad Khan
> JNCIP - M/T # 834
> IT Specialist
> Global Technology Services, IBM
> fahad at pk.ibm.com
> +92-301-8247638
> Skype: fahad-ibm
> http://pk.linkedin.com/in/muhammadfahadkhan
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>